G-PET

Name: G-PET
SKU: GPET
Availability: InStock

Product ID: GPET

User Unavailable

Visit Store

Rated 1 out of 5

0 reviews

The G-PET (PETG) filament has been demonstrated to be compatible with the majority of printers on the market that utilise FFF and FDM technology. Treed G-PET is a modified PET-based copolymer that has been developed to produce an exceptional filament. This filament possesses the characteristics of strength and resistance equal to those of ABS, as well as the high stability that is typical of PLA, but which is absent in the latter.

It is imperative to acknowledge the significance of the odour-free characteristic exhibited by G-PET throughout the printing process. The substance in question has been demonstrated to adapt effectively to post-print finishes, thereby yielding a shiny artefact with a natural colouration. The product is available in five different colours: white, black, light blue, ruby red and transparent. General print recommendations: In order to obtain optimal results, it is recommended that the filament be pre-dried at a temperature of 65°C for a minimum duration of three hours. It is imperative that the drying time is increased in the case of reels that weigh 1 kg. It is imperative to ensure that the filament is not left stationary within the nozzle for a period exceeding 20 minutes during the printing process. It is imperative to adhere to the printer's guidelines strictly. Weight: 1.00 kg.

No support file available

SUGGESTED PRINT SETS (1)
Suggested print sets	unit	value	test method
extruder temp	C°	230-250	internal
plate temp	C°	90-110	internal
min. nozzle diameter	mm	0,3	internal
fan	%	0-20	internal
print speed	mm/1°	60-70	internal
PROPERTY
Physical
Specific gravity	g/cm3	1,27	ISO 1183
Water absorption	%	0,13	23°C / 24 h
Mechanical at 23°C / 50% rh
Tensile stress at break	MPa	26	ISO 527
Charpy impact (23°C)	kJ/m2	7,9	ISO 180
Hardness	sh/R	105	ASTM D785
Thermal
Melting point	°C	240	ISO 11357
Heat distortion temp.	°C	70	ISO 75
Vicat softening temp.	°C	78	ISO 306

Color

Total:

Qty:

User Reviews

No ratings yet. Be the first to rate this product!

G-PET

Related products

Structura MA

TPE-U Flexmark 7

PLA Shogun

Heritage Brick

User Reviews

Feedback

Supported Printers