F.R.A.N.C. V0-TEMP Fire Resistance ABS-PC Not Chrome. PC-ABS advanced resin meets the requirements of EN 45545-2, R22, R23, HL1, HL2.
Additional informations
Generally, filaments made with F.R.A.N.C. V0-TEMP (PC-ABS) can be used with conventional 3D printers that utilize FDM/FFF technology. F.R.A.N.C. V0-TEMP (PC-ABS) is a 50/50 polymer alloy designed for 3D printing. For optimal results, we recommend pre-drying the filaments at 80°-100°C for 3 to 4 hours. If you're using spools that are 1 kg or more, consider extending the drying time.
Avoid leaving the filament in the nozzle for more than 20 minutes. If the temperature drops below 210°C, it is advisable to turn off the thermal control.
(Note: The suggested print settings are general recommendations. Each printer requires specific settings such as nozzle temperature, bed temperature, etc.).
Certification Statement
We hereby certify that the product F.R.A.N.C. V0 complies with the following certification requirements:
- DIN VDE 0472/Part 815: Certified as Halogen-Free.
UL 94:
- Rated V0 at a thickness of 1.5 mm.
- Rated 5VA at a thickness of 3.0 mm.
- EN 45545-2:
- Compliant with requirements R22, R23, HL1, and HL2.
This certification confirms that F.R.A.N.C. V0 meets the necessary safety and environmental standards for its intended applications.
