The optimal utilisation of these components is in the context of circulation pumps, body and turbine components that are exposed to a multitude of aggressive fluids, thereby rendering them suitable for ATEX applications. Additionally, these components find application in automotive engine components and railway communications cases. It is important to note that the material under discussion is not susceptible to the effects of hygroscopy. Therefore, it is not necessary to subject the material to a process of pre-drying prior to use.
Weight: 0.70 kg.
| SUGGESTED PRINT SETS (1) |
| Suggested print sets | unit | value | test method |
| extruder temp | C° | 255-270 | internal |
| plate temp | C° | 50 | internal |
| min. nozzle diameter | mm | 0,5 | internal |
| fan | % | 0 | internal |
| print speed | mm/sec. | 35-45 | internal |
| PROPERTY |
| Physical | | | |
| Specific gravity | g/cm3 | 1 | ISO 1183 |
| Water absorption | % | <0,3 | 23°C / 24 h |
| Linear mould shrinkage | % | 0,2-0,6 | DIN 16901 |
| Mechanical at 23°C / 50% rh | | | |
| Tensile strength | MPa | 54 | ISO 527 |
| Elongation at maximum force | % | 1,2 | ISO 527 |
| Modulus of elasticity | GPa | 7 | ISO 527 |
| Flexural strength | MPa | 78 | ISO 178 |
| Flexural elongation | % | 1,5 | ISO 178 |
| Flexural modulus | GPa | 6 | ISO 178 |
| Charpy impact strength | kJ/m2 | 35 | ISO 179 1eU |
| Thermal | | | |
| Vicat softening temp. | °C | 80 | DIN ISO 306 |
| Maximum (short term) use temp. | °C | 130 | - |
| Continuous service temp | °C | 100 | UL746B |
| Electrical | | | |
| Insulation resistance | Ω | ≤103 -7 | DIN/IEC 60167 |
| Surface resistance | Ω | ≤107 | DIN IEC 60093 |
