Works with Hermes

CoLiDo X16 with Hermes: print from your phone, no SD card

Your X16 becomes a one-tap printer. Plug Hermes in with the USB cable and choose what to print from the catalogue: no slicer, no SD card, even if the printer has no Wi-Fi.

Connect your X16 with Hermes· € 49.99 See what to print

Your X16 with Genesys

BUILD VOLUME: 160 × 160 × 180 mm
HOW HERMES CONNECTS: With the USB cableeven if the printer has no Wi-Fi: Hermes takes care of it
NOZZLE: 0.4 mm
MATERIAL: PLA

We scale objects larger than your build plate to fit before preparing the file.

What changes with Hermes

Print from your phone, even if your printer has no Wi-Fi
Hermes connects to the printer with the USB cable and receives prints from the app.
No SD card
No more copying files or swapping cards: the print arrives on its own.
No slicer
The file is already prepared for your X16: choose and tap Print.

How to connect, in 3 steps

01
Plug Hermes into the printer with the USB cable
02
Pair Hermes in The Genesys app
03
Choose an object and tap Print

Where to start

The whole catalogue →

Frequently asked questions

Does my X16 have Wi-Fi? How do I print from my phone?

With Hermes, you can print from your phone even if your printer has no Wi-Fi. Connect Hermes to the printer over USB and to your home network, then choose an object in the app and tap Print.

Do I need a slicer to print with my X16?

No. We prepare the file for your X16: you choose the object and tap Print.

How large can objects be for my X16?

The build volume is 160 × 160 × 180 mm. We scale larger objects to fit these dimensions before preparing the file.

Which nozzle do I need on my X16?

The standard 0.4 mm one: the catalogue files are prepared for this nozzle.

Which material should I use?

PLA: it's the material we prepare the X16's files for.

More CoLiDo printers

All printers →

160 V2

Your X16 is ready for Hermes.

Choose from the catalogue and print with Hermes: we prepare the file for your printer.

Connect your X16 with Hermes· € 49.99