Works with Hermes

Geeetech M1 with Hermes: print from your phone, no SD card

Your M1 becomes a one-tap printer. Plug Hermes in with the USB cable and choose what to print from the catalogue: no slicer, no SD card, even if the printer has no Wi-Fi.

Connect your M1 with Hermes· € 49.99 See what to print

Your M1 with Genesys

BUILD VOLUME: 105 × 105 × 95 mm
HOW HERMES CONNECTS: With the USB cableeven if the printer has no Wi-Fi: Hermes takes care of it
NOZZLE: 0.4 mm
MATERIAL: PLA

We scale objects larger than your build plate to fit before preparing the file.

What changes with Hermes

Print from your phone, even if your printer has no Wi-Fi
Hermes connects to the printer with the USB cable and receives prints from the app.
No SD card
No more copying files or swapping cards: the print arrives on its own.
No slicer
The file is already prepared for your M1: choose and tap Print.

How to connect, in 3 steps

01
Plug Hermes into the printer with the USB cable
02
Pair Hermes in The Genesys app
03
Choose an object and tap Print

Where to start

The whole catalogue →

Frequently asked questions

Does my M1 have Wi-Fi? How do I print from my phone?

With Hermes, you can print from your phone even if your printer has no Wi-Fi. Connect Hermes to the printer over USB and to your home network, then choose an object in the app and tap Print.

Do I need a slicer to print with my M1?

No. We prepare the file for your M1: you choose the object and tap Print.

How large can objects be for my M1?

The build volume is 105 × 105 × 95 mm. We scale larger objects to fit these dimensions before preparing the file.

Which nozzle do I need on my M1?

The standard 0.4 mm one: the catalogue files are prepared for this nozzle.

Which material should I use?

PLA: it's the material we prepare the M1's files for.

More Geeetech printers

All printers →

Your M1 is ready for Hermes.

Choose from the catalogue and print with Hermes: we prepare the file for your printer.

Connect your M1 with Hermes· € 49.99