MagicMaker MM hqs SF with Hermes: print from your phone, no SD card
Your MM hqs SF becomes a one-tap printer. Plug Hermes in with the USB cable and choose what to print from the catalogue: no slicer, no SD card, even if the printer has no Wi-Fi.
Your MM hqs SF with Genesys
- BUILD VOLUME
- 220 × 210 × 300 mm
- HOW HERMES CONNECTS
- With the USB cableeven if the printer has no Wi-Fi: Hermes takes care of it
- NOZZLE
- 0.4 mm
- MATERIAL
- PLA
What changes with Hermes
- Print from your phone, even if your printer has no Wi-Fi
Hermes connects to the printer with the USB cable and receives prints from the app.
- No SD card
No more copying files or swapping cards: the print arrives on its own.
- No slicer
The file is already prepared for your MM hqs SF: choose and tap Print.
How to connect, in 3 steps
- 01
Plug Hermes into the printer with the USB cable
- 02
Pair Hermes in The Genesys app
- 03
Choose an object and tap Print
Where to start
The whole catalogue →
Pecora, armatura per corpoFree
Lego Technic, set di assi e perniFree
Auto sportiva, modellino da collezioneFree
Fiat 600, modello da assemblareFree
Insegna al neon personalizzataFree
Lanterna di Natale con Albero, decorazione da tavoloFree
Clip per caffè Miele, supporto per cialdeFree
Organizzatore a cassette per batterieFree
Frequently asked questions
Does my MM hqs SF have Wi-Fi? How do I print from my phone?
With Hermes, you can print from your phone even if your printer has no Wi-Fi. Connect Hermes to the printer over USB and to your home network, then choose an object in the app and tap Print.
Do I need a slicer to print with my MM hqs SF?
No. We prepare the file for your MM hqs SF: you choose the object and tap Print.
How large can objects be for my MM hqs SF?
The build volume is 220 × 210 × 300 mm. We scale larger objects to fit these dimensions before preparing the file.
Which nozzle do I need on my MM hqs SF?
The standard 0.4 mm one: the catalogue files are prepared for this nozzle.
Which material should I use?
PLA: it's the material we prepare the MM hqs SF's files for.
More MagicMaker printers
All printers →
Your MM hqs SF is ready for Hermes.
Choose from the catalogue and print with Hermes: we prepare the file for your printer.
Connect your MM hqs SF with Hermes· € 49.99