Works with Hermes

Prusa MK3S with Hermes: print from your phone, no SD card

Your MK3S becomes a one-tap printer. Plug Hermes in with the USB cable and choose what to print from the catalogue: no slicer, no SD card, even if the printer has no Wi-Fi.

Connect your MK3S with Hermes· € 49.99 See what to print

Your MK3S with Genesys

BUILD VOLUME: 250 × 210 × 210 mm
HOW HERMES CONNECTS: With the USB cableeven if the printer has no Wi-Fi: Hermes takes care of it
NOZZLE: 0.4 mm
MATERIAL: PLA

We scale objects larger than your build plate to fit before preparing the file.

What changes with Hermes

Print from your phone, even if your printer has no Wi-Fi
Hermes connects to the printer with the USB cable and receives prints from the app.
No SD card
No more copying files or swapping cards: the print arrives on its own.
No slicer
The file is already prepared for your MK3S: choose and tap Print.

How to connect, in 3 steps

01
Plug Hermes into the printer with the USB cable
02
Pair Hermes in The Genesys app
03
Choose an object and tap Print

Where to start

The whole catalogue →

Frequently asked questions

Does my MK3S have Wi-Fi? How do I print from my phone?

With Hermes, you can print from your phone even if your printer has no Wi-Fi. Connect Hermes to the printer over USB and to your home network, then choose an object in the app and tap Print.

Do I need a slicer to print with my MK3S?

No. We prepare the file for your MK3S: you choose the object and tap Print.

How large can objects be for my MK3S?

The build volume is 250 × 210 × 210 mm. We scale larger objects to fit these dimensions before preparing the file.

Which nozzle do I need on my MK3S?

The standard 0.4 mm one: the catalogue files are prepared for this nozzle.

Which material should I use?

PLA: it's the material we prepare the MK3S's files for.

More Prusa printers

All printers →

Your MK3S is ready for Hermes.

Choose from the catalogue and print with Hermes: we prepare the file for your printer.

Connect your MK3S with Hermes· € 49.99