RatRig V-Core 4 IDEX 300 MIRROR MODE with Hermes: print from the catalogue, no slicer
One tap and it prints. Hermes connects to your V-Core 4 IDEX 300 MIRROR MODE on your home network and brings you a catalogue already prepared for your printer: no slicer.
Your V-Core 4 IDEX 300 MIRROR MODE with Genesys
- BUILD VOLUME
- 120 × 300 × 300 mm
- HOW HERMES CONNECTS
- Over your networkHermes and the printer on the same home network
- NOZZLE
- 0.4 mm
- MATERIAL
- PLA
What changes with Hermes
- No slicer
The file is already prepared for your V-Core 4 IDEX 300 MIRROR MODE: choose and tap Print.
- The catalogue is ready
Every object is fitted to your V-Core 4 IDEX 300 MIRROR MODE before it arrives.
- Alert when it's done
We let you know on your phone when the object is ready.
How to connect, in 3 steps
- 01
Plug Hermes in near your router
- 02
In the app, Hermes finds your V-Core 4 IDEX 300 MIRROR MODE on your network
- 03
Choose an object and tap Print
Where to start
The whole catalogue →
Pecora, armatura per corpoFree
Lego Technic, set di assi e perniFree
Auto sportiva, modellino da collezioneFree
Fiat 600, modello da assemblareFree
Insegna al neon personalizzataFree
Lanterna di Natale con Albero, decorazione da tavoloFree
Clip per caffè Miele, supporto per cialdeFree
Organizzatore a cassette per batterieFree
Frequently asked questions
How large can objects be for my V-Core 4 IDEX 300 MIRROR MODE?
The build volume is 120 × 300 × 300 mm. We scale larger objects to fit these dimensions before preparing the file.
Do I need a slicer to print with my V-Core 4 IDEX 300 MIRROR MODE?
No. We prepare the file for your V-Core 4 IDEX 300 MIRROR MODE: you choose the object and tap Print.
How do I print from my phone with my V-Core 4 IDEX 300 MIRROR MODE?
Connect Hermes and your printer to the same home network. Choose an object in the app and tap Print. We prepare the file; you can follow the print on your phone.
Which nozzle do I need on my V-Core 4 IDEX 300 MIRROR MODE?
The standard 0.4 mm one: the catalogue files are prepared for this nozzle.
Which material should I use?
PLA: it's the material we prepare the V-Core 4 IDEX 300 MIRROR MODE's files for.
More RatRig printers
All printers →
Your V-Core 4 IDEX 300 MIRROR MODE is ready for Hermes.
Choose from the catalogue and print with Hermes: we prepare the file for your printer.
Connect your V-Core 4 IDEX 300 MIRROR MODE with Hermes· € 49.99