Busto di Fratello Caverna con clava e base
- Ready to print on a Creality SPARKX i7.
- Estimated time: about 4 h 45 min on a Creality SPARKX i7.
- About 30 g of PLA.
- Prints in 2 sessions.
- 2 parts to assemble.
- Single colour: you choose which.
- Free catalogue model.
Free
QUANTITY
FEATURES
- PARTS
- 2
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 68.0 mmDepth 58.0 mmHeight 52.5 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 4 h 43 · 31.2 g · 2 sessions
Bust of Fratello Caverna, the caveman character, depicted with a large club raised above his head and the typical hairy body. The model consists of the bust and a circular base with a decorated cubic block and a small vertical element, designed to display the figure. Suitable for collectors, character enthusiasts and anyone looking for a decorative piece for a desk or display case. The bust measures 6.8 cm in width
- Bust of Fratello Caverna with raised club
- Hairy body and raised arm
- Circular base with decorated block
- Designed for display on a desk or display case
- Bust dimensions: 6.8 cm in width
THE PARTS · 2
CavernadestrobustoPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
BASEcompletaPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
FEATURES
- PARTS
- 2
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 68.0 mmDepth 58.0 mmHeight 52.5 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 4 h 43 · 31.2 g · 2 sessions
ADOPTION
0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet
Reviews
No reviews yetReviews come from people who bought the model and printed it at least once.
More in «Characters & Figures»
FREE9 parts · 26 h 31 · Creality SPARKX i7 · 206 gPrint nowSuperlópez, figura da assemblarePrint time: ≈ 26 h 31 minThe GenesysCharacters & Figures
FREE12 parts · 25 h 33 · Creality SPARKX i7 · 184 gPrint nowBatatinha, diorama con personaggio e cabina telefonicaPrint time: ≈ 25 h 33 minThe GenesysCharacters & Figures
FREE17 parts · 27 h 06 · Creality SPARKX i7 · 199 gPrint nowBenny, diorama da assemblare con scena e personaggioPrint time: ≈ 27 h 6 minThe GenesysCharacters & Figures
FREE11 parts · 15 h 52 · Creality SPARKX i7 · 162 gPrint nowBatgirl, figura da assemblarePrint time: ≈ 15 h 52 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 12 · Creality SPARKX i7 · 46 gPrint nowGoku, figure to assemblePrint time: ≈ 6 h 12 minThe GenesysCharacters & Figures
FREE1 part · 10 h 44 · Creality SPARKX i7 · 71 gPrint nowDick Dastardly, statuinaPrint time: ≈ 10 h 44 minThe GenesysCharacters & Figures
FREE4 parts · 5 h 32 · Creality SPARKX i7 · 41 gPrint nowChaozu, figure to assemble with diorama basePrint time: ≈ 5 h 32 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 02 · Creality SPARKX i7 · 42 gPrint nowYamcha, figura da collezione con basi a tema desertoPrint time: ≈ 6 h 2 minThe GenesysCharacters & Figures