Calvin e Hobbes, villaggio di pupazzi di neve da assemblare

Calvin e Hobbes, villaggio di pupazzi di neve da assemblare

  • Ready to print on a Creality SPARKX i7.
  • Estimated time: about 15 h on a Creality SPARKX i7.
  • About 215 g of PLA.
  • Prints in 38 sessions.
  • 38 parts to assemble.
  • Single colour: you choose which.
  • Free catalogue model.
Free
QUANTITY

FEATURES

PARTS
38
COMPATIBLE PRINTERS
330authorised to print at least one part
FOOTPRINT
Width 145.8 mmDepth 132.3 mmHeight 83.6 mm
PRODUCTION NODE
Creality SPARKX i7Print time 14 h 30 · 217.2 g · 38 sessions

A collection of winter scenes starring a gang of snowmen inspired by the Calvin and Hobbes comic strips. The set includes several sculptural groups: snowmen bowling with a ball and pins, a snowman run over by a shark, one eating an ice cream cone, one sliding on a sled and more, including a mutant snowman. The pieces are designed to be assembled and arranged freely, forming a small village to display as an ornament or centerpiece. The largest base measures 14.58 cm in length. Suitable for those who love comics and winter-themed decorations

  • Set of several scenes with snowmen
  • Includes bowling, shark, ice cream cone and sled
  • Separate pieces to assemble and arrange as you like
  • Theme inspired by Calvin and Hobbes
  • Largest base 14.58 cm long

THE PARTS · 38

bowling-pin-holderPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
pin-holderPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
bowlerPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
sled-vic-frontPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
repaired snowcone-eaterPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
mutantPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
snowcone-eater-left-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
shark-victimPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
snowcone-eater-right-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
bowling-victimPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
snowcone-victimPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
sledder-hatPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
sledder-right-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
snowcone-icePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
drowningPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
snowcone-conePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
repaired bowling-vic-left-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
bowlingball-head-tempPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
bowlingball-headPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
repaired sledPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
sledderPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
bowler-left-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
repaired bowling-vic-right-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
sledder-nosePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
snowcone-eater-nosePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
sledder-left-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
repaired bowler-right-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
repaired sled-vic-backPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
shark-3PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
shark-2PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
shark-1PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
mutant-left-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
mutant-right-armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
repaired bowlingball-standPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
bowler-nosePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
mutant-nose2PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
bowling-pinPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
mutant-nose1PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C

FEATURES

PARTS
38
COMPATIBLE PRINTERS
330authorised to print at least one part
FOOTPRINT
Width 145.8 mmDepth 132.3 mmHeight 83.6 mm
PRODUCTION NODE
Creality SPARKX i7Print time 14 h 30 · 217.2 g · 38 sessions

ADOPTION

0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet

Reviews

No reviews yetReviews come from people who bought the model and printed it at least once.

Stay in touch

The Genesys news, in your inbox.

Leave your email and we’ll write when there’s something new.

the GENESYSThe Genesys S.r.l. socio unico · P.IVA 13675650967 · © 2026
Sell your modelsGuides and ideasCompatible printersPrivacyTerms of saleTerms of ServiceITEN

Cookies and measurement tools

We use cookies and browser storage that are strictly necessary to run the site. Only if you accept do we also use statistics tools (Google Analytics, Microsoft Clarity) and marketing tools (the Meta pixel). You can accept everything, reject everything or choose, and change your mind at any time from “Cookie settings” at the bottom of every page. Cookie policy