Coco Bandicoot, statuina da assemblare
- Ready to print on a Creality SPARKX i7.
- Estimated time: about 2 d 3 h on a Creality SPARKX i7.
- About 570 g of PLA.
- Prints in 11 sessions.
- 11 parts to assemble.
- Single colour: you choose which.
- Free catalogue model.
Free
QUANTITY
FEATURES
- PARTS
- 11
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 148.5 mmDepth 171.4 mmHeight 155.0 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 51 h 15 · 572.3 g · 11 sessions
Coco Bandicoot figurine supplied in multiple parts to assemble, with a circular base in sections, hands, body and the complete character with his Aku Aku mask. A collectible model for fans of the Crash Bandicoot series, to assemble and place on a shelf or desk. The base measures 14.85 cm in diameter
- Coco Bandicoot character with Aku Aku mask
- Supplied in multiple parts to assemble
- Circular base in sections
- Collectible model for fans of the series
- Base 14.85 cm in diameter
THE PARTS · 11
Coco Body V2PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
DecimateadoPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
PalmPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Coco HandsPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Aku AkuPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Palm BodyPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base 4PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base 1PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base 2PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base 3PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
BoxPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
FEATURES
- PARTS
- 11
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 148.5 mmDepth 171.4 mmHeight 155.0 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 51 h 15 · 572.3 g · 11 sessions
ADOPTION
0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet
Reviews
No reviews yetReviews come from people who bought the model and printed it at least once.
More in «Characters & Figures»
FREE9 parts · 26 h 31 · Creality SPARKX i7 · 206 gPrint nowSuperlópez, figura da assemblarePrint time: ≈ 26 h 31 minThe GenesysCharacters & Figures
FREE12 parts · 25 h 33 · Creality SPARKX i7 · 184 gPrint nowBatatinha, diorama con personaggio e cabina telefonicaPrint time: ≈ 25 h 33 minThe GenesysCharacters & Figures
FREE17 parts · 27 h 06 · Creality SPARKX i7 · 199 gPrint nowBenny, diorama da assemblare con scena e personaggioPrint time: ≈ 27 h 6 minThe GenesysCharacters & Figures
FREE11 parts · 15 h 52 · Creality SPARKX i7 · 162 gPrint nowBatgirl, figura da assemblarePrint time: ≈ 15 h 52 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 12 · Creality SPARKX i7 · 46 gPrint nowGoku, figure to assemblePrint time: ≈ 6 h 12 minThe GenesysCharacters & Figures
FREE1 part · 10 h 44 · Creality SPARKX i7 · 71 gPrint nowDick Dastardly, statuinaPrint time: ≈ 10 h 44 minThe GenesysCharacters & Figures
FREE4 parts · 5 h 32 · Creality SPARKX i7 · 41 gPrint nowChaozu, figure to assemble with diorama basePrint time: ≈ 5 h 32 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 02 · Creality SPARKX i7 · 42 gPrint nowYamcha, figura da collezione con basi a tema desertoPrint time: ≈ 6 h 2 minThe GenesysCharacters & Figures