Ibuki di Street Fighter, figura da assemblare

Ibuki di Street Fighter, figura da assemblare

  • Ready to print on a Creality SPARKX i7.
  • Estimated time: about 1 d 15 h on a Creality SPARKX i7.
  • About 325 g of PLA.
  • Prints in 24 sessions.
  • 24 parts to assemble.
  • Single colour: you choose which.
  • Free catalogue model.
Free
QUANTITY

FEATURES

PARTS
24
COMPATIBLE PRINTERS
337authorised to print at least one part
FOOTPRINT
Width 127.1 mmDepth 139.0 mmHeight 83.7 mm
PRODUCTION NODE
Creality SPARKX i7Print time 39 h 12 · 327.1 g · 24 sessions

Assembly figure dedicated to Ibuki, the kunoichi from the Street Fighter series. The model consists of multiple parts that reproduce the character in a dynamic pose suspended on a cloudy base, with hair gathered in a long ponytail and side locks. Variants of the head with and without mask, hands with weapon and accessory, clothing and components for the scenic base are included. The parts must be assembled and completed to obtain the finished figure

  • Street Fighter character to assemble
  • Separate parts for head, torso, legs and arms
  • Head variants with and without mask
  • Scenic base with cloud and accessories
  • Dynamic pose with long hair ponytail

THE PARTS · 24

head sfw no maskPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
headPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Head sfw maskPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
chest sfwPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
skirtPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
right legPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
left legPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
maskPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
shoes rightPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
shoes leftPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
chestPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
hand katanaPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
hand shurikenPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
logoPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
PonytailPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
base uncutPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
smokePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
basemidPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
leg1PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
leg2PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
base rockPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
base topPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
left armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
right armPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C

FEATURES

PARTS
24
COMPATIBLE PRINTERS
337authorised to print at least one part
FOOTPRINT
Width 127.1 mmDepth 139.0 mmHeight 83.7 mm
PRODUCTION NODE
Creality SPARKX i7Print time 39 h 12 · 327.1 g · 24 sessions

ADOPTION

0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet

Reviews

No reviews yetReviews come from people who bought the model and printed it at least once.

Stay in touch

The Genesys news, in your inbox.

Leave your email and we’ll write when there’s something new.

the GENESYSThe Genesys S.r.l. socio unico · P.IVA 13675650967 · © 2026
Sell your modelsGuides and ideasCompatible printersPrivacyTerms of saleTerms of ServiceITEN

Cookies and measurement tools

We use cookies and browser storage that are strictly necessary to run the site. Only if you accept do we also use statistics tools (Google Analytics, Microsoft Clarity) and marketing tools (the Meta pixel). You can accept everything, reject everything or choose, and change your mind at any time from “Cookie settings” at the bottom of every page. Cookie policy