Kenpachi, diorama da assemblare

Kenpachi, diorama da assemblare

  • Ready to print on a Creality SPARKX i7.
  • Estimated time: about 3 d 12 h on a Creality SPARKX i7.
  • About 645 g of PLA.
  • Prints in 27 sessions.
  • 27 parts to assemble.
  • Single colour: you choose which.
  • Free catalogue model.
Free
QUANTITY

FEATURES

PARTS
27
COMPATIBLE PRINTERS
337authorised to print at least one part
FOOTPRINT
Width 183.4 mmDepth 164.6 mmHeight 194.4 mm
PRODUCTION NODE
Creality SPARKX i7Print time 83 h 51 · 643.2 g · 27 sessions

Diorama of Kenpachi Zaraki, captain of the eleventh division in Bleach, made up of several parts to assemble: head, hair, torso, arms, legs, feet, coat, belt, belt knot, zanpakuto and scenery bases. The model reproduces the figure with the coat open and the sword held, designed to be assembled and placed on a scenic base. Suitable for collectors, anime and manga fans and those who love assembling display figures

  • Figure of Kenpachi Zaraki with coat, belt and zanpakuto
  • Made up of several parts to assemble: head, hair, torso, arms, legs and feet
  • Includes scenic bases for composing the diorama
  • The largest part measures 19,44 cm
  • For collectors and Bleach fans

THE PARTS · 27

HeadPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Left ArmPLA
Photo of Left Arm
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
LegsPLA
Photo of Legs
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Right LegPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Right ArmPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Left LegPLA
Photo of Left Leg
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
TorsoPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Part 2PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Right ArmPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
TorsoPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
HairPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Coat RightPLA
Photo of Coat Right
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Right FootPLA
Photo of Right Foot
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Coat LeftPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
BeltPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Part 4PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Left ArmPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
HeadPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Left FootPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
ZanpakutoPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Left FootPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Part 3PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Right FootPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
ZanpakutoPLA
Photo of Zanpakuto
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Part 1PLA
Photo of Part 1
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Belt KnotPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Coat KeyPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C

FEATURES

PARTS
27
COMPATIBLE PRINTERS
337authorised to print at least one part
FOOTPRINT
Width 183.4 mmDepth 164.6 mmHeight 194.4 mm
PRODUCTION NODE
Creality SPARKX i7Print time 83 h 51 · 643.2 g · 27 sessions

ADOPTION

0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet

Reviews

No reviews yetReviews come from people who bought the model and printed it at least once.

Stay in touch

The Genesys news, in your inbox.

Leave your email and we’ll write when there’s something new.

the GENESYSThe Genesys S.r.l. socio unico · P.IVA 13675650967 · © 2026
Sell your modelsGuides and ideasCompatible printersPrivacyTerms of saleTerms of ServiceITEN

Cookies and measurement tools

We use cookies and browser storage that are strictly necessary to run the site. Only if you accept do we also use statistics tools (Google Analytics, Microsoft Clarity) and marketing tools (the Meta pixel). You can accept everything, reject everything or choose, and change your mind at any time from “Cookie settings” at the bottom of every page. Cookie policy