Ladro Esperto della Gilda dei Ladri, miniatura con base
- Ready to print on a Creality SPARKX i7.
- Estimated time: about 1 h 30 min on a Creality SPARKX i7.
- Less than 10 g of PLA.
- Prints in 4 sessions.
- 4 parts to assemble.
- Single colour: you choose which.
- Free catalogue model.
Choose the version · 2
Free
QUANTITY
FEATURES
- PARTS
- 4
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 38.6 mmDepth 27.1 mmHeight 33.7 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 1 h 34 · 7.4 g · 4 sessions
Unofficial product for Dungeons & Dragons and other role-playing games. Miniature of a hooded rogue of the Thieves' Guild, depicted running with his cloak in the wind and a short scimitar held in a reverse grip. The model includes the figure, a leather pouch, the weapon and a circular base decorated with paving stones. The figure measures 3.86 cm in length and is suitable for role-playing sessions, dioramas and fantasy miniature collections
- Hooded rogue running with his cloak in the wind
- Short scimitar held in a reverse grip
- Leather pouch as a separate accessory
- Circular base decorated with paving stones
- Miniature for role-playing games and fantasy dioramas
THE PARTS · 4
Adept Thief A (cowled m)PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Leather Pouch RPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Short Scimitar (reverse grip) LPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base Thief APLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
FEATURES
- PARTS
- 4
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 38.6 mmDepth 27.1 mmHeight 33.7 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 1 h 34 · 7.4 g · 4 sessions
ADOPTION
0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet
Reviews
No reviews yetReviews come from people who bought the model and printed it at least once.
More in «Dungeons & Dragons»
FREE5 parts · 256 h 01 · Anycubic Chiron · 1,286 gPrint nowDifensore nano, miniatura da assemblarePrint time: ≈ 256 h 1 minThe GenesysDungeons & Dragons
FREE2 parts · 11 h 05 · Creality SPARKX i7 · 54 gPrint nowSlathos su Hive Colossus, miniaturaPrint time: ≈ 11 h 5 minThe GenesysDungeons & Dragons
FREE17 parts · 55 h 09 · Creality SPARKX i7 · 315 gPrint nowBaalzrodan il Re Demone, figura scompostaPrint time: ≈ 55 h 9 minThe GenesysDungeons & Dragons
FREE1 part · 12 h 48 · Creality SPARKX i7 · 66 gPrint nowPiccola torre di avvistamento amazzonicaPrint time: ≈ 12 h 48 minThe GenesysDungeons & Dragons
FREE10 parts · 15 h 52 · Creality SPARKX i7 · 87 gPrint nowRosputakk su Demonfrog cornuto gigante, miniatura da assemblarePrint time: ≈ 15 h 52 minThe GenesysDungeons & Dragons
FREE4 parts · 133 h 32 · Elegoo Neptune 3 Plus · 634 gPrint nowJanto Beetroot, gnomo con spada corta da assemblarePrint time: ≈ 133 h 32 minThe GenesysDungeons & Dragons
FREE3 parts · 3 h 02 · Creality SPARKX i7 · 15 gPrint nowVulpeana Whitebranch, maga elfica con volpe famiglioPrint time: ≈ 3 h 2 minThe GenesysDungeons & Dragons
FREE2 parts · 4 h 33 · Creality SPARKX i7 · 18 gPrint nowPrincipessa Inca a cavallo di un raptor, miniatura FantasyPrint time: ≈ 4 h 33 minThe GenesysDungeons & Dragons