Ladro Esperto della Gilda dei Ladri, miniatura da assemblare
- Ready to print on a Creality SPARKX i7.
- Estimated time: about 1 h 30 min on a Creality SPARKX i7.
- Less than 10 g of PLA.
- Prints in 5 sessions.
- 5 parts to assemble.
- Single colour: you choose which.
- Free catalogue model.
Choose the version · 2
Free
QUANTITY
FEATURES
- PARTS
- 5
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 32.9 mmDepth 24.8 mmHeight 33.9 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 1 h 23 · 6.9 g · 5 sessions
Unofficial product for Dungeons & Dragons and other role-playing games. Miniature of an expert thief from the thieves' guild, depicted with hood, cloak and short bow. The model consists of several separate parts, including body, circular base, quiver, short bow and open hand, to be assembled to obtain the complete figure. The dynamic pose and clothing details make it suitable for role-playing games, scenarios and miniature collections. The base measures 2.48 cm in diameter
- Miniature of a thief with hood and cloak
- Model consisting of several parts to assemble
- Includes circular base, quiver, short bow and open hand
- Dynamic pose with bow ready
- Suitable for role-playing games and scenarios
THE PARTS · 5
Adept Thief E (cowler f)PLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Thieves QuiverPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Thief Shortbow RPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base Thief EPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Thief Open Hand female (smaller) LPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
FEATURES
- PARTS
- 5
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 32.9 mmDepth 24.8 mmHeight 33.9 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 1 h 23 · 6.9 g · 5 sessions
ADOPTION
0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet
Reviews
No reviews yetReviews come from people who bought the model and printed it at least once.
More in «Dungeons & Dragons»
FREE5 parts · 256 h 01 · Anycubic Chiron · 1,286 gPrint nowDifensore nano, miniatura da assemblarePrint time: ≈ 256 h 1 minThe GenesysDungeons & Dragons
FREE2 parts · 11 h 05 · Creality SPARKX i7 · 54 gPrint nowSlathos su Hive Colossus, miniaturaPrint time: ≈ 11 h 5 minThe GenesysDungeons & Dragons
FREE17 parts · 55 h 09 · Creality SPARKX i7 · 315 gPrint nowBaalzrodan il Re Demone, figura scompostaPrint time: ≈ 55 h 9 minThe GenesysDungeons & Dragons
FREE1 part · 12 h 48 · Creality SPARKX i7 · 66 gPrint nowPiccola torre di avvistamento amazzonicaPrint time: ≈ 12 h 48 minThe GenesysDungeons & Dragons
FREE10 parts · 15 h 52 · Creality SPARKX i7 · 87 gPrint nowRosputakk su Demonfrog cornuto gigante, miniatura da assemblarePrint time: ≈ 15 h 52 minThe GenesysDungeons & Dragons
FREE4 parts · 133 h 32 · Elegoo Neptune 3 Plus · 634 gPrint nowJanto Beetroot, gnomo con spada corta da assemblarePrint time: ≈ 133 h 32 minThe GenesysDungeons & Dragons
FREE3 parts · 3 h 02 · Creality SPARKX i7 · 15 gPrint nowVulpeana Whitebranch, maga elfica con volpe famiglioPrint time: ≈ 3 h 2 minThe GenesysDungeons & Dragons
FREE2 parts · 4 h 33 · Creality SPARKX i7 · 18 gPrint nowPrincipessa Inca a cavallo di un raptor, miniatura FantasyPrint time: ≈ 4 h 33 minThe GenesysDungeons & Dragons