Obelix, statuina da assemblare
- Ready to print on a Creality SPARKX i7.
- Estimated time: about 11 h on a Creality SPARKX i7.
- About 175 g of PLA.
- Prints in 8 sessions.
- 8 parts to assemble.
- Single colour: you choose which.
- Free catalogue model.
Free
QUANTITY
FEATURES
- PARTS
- 8
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 149.9 mmDepth 149.9 mmHeight 70.1 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 11 h 06 · 172.8 g · 8 sessions
Statuette of Obelix, the famous comic book character, depicted standing on a themed circular base. The model consists of several parts to be assembled: the body, the arms, the feet, the horns of the helmet and a two-level base. The base measures 15 cm in diameter. Once assembled, the figure becomes a collectible piece for fans of the character and of the Gaulish adventures
- Multiple-part Obelix statuette to be assembled
- Two-level circular base with a diameter of 15 cm
- Body, arms, feet and helmet horns separated
- Collectible figure for fans of the character
- Suitable as a desk or display ornament
THE PARTS · 8
obelix BUSTEPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
obelixpantPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
obelix piedsPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
socle hautPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
bras obelixPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
socle basPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
cornes casque obelixPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
pafPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
FEATURES
- PARTS
- 8
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 149.9 mmDepth 149.9 mmHeight 70.1 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 11 h 06 · 172.8 g · 8 sessions
ADOPTION
0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet
Reviews
No reviews yetReviews come from people who bought the model and printed it at least once.
More in «Characters & Figures»
FREE9 parts · 26 h 31 · Creality SPARKX i7 · 206 gPrint nowSuperlópez, figura da assemblarePrint time: ≈ 26 h 31 minThe GenesysCharacters & Figures
FREE12 parts · 25 h 33 · Creality SPARKX i7 · 184 gPrint nowBatatinha, diorama con personaggio e cabina telefonicaPrint time: ≈ 25 h 33 minThe GenesysCharacters & Figures
FREE17 parts · 27 h 06 · Creality SPARKX i7 · 199 gPrint nowBenny, diorama da assemblare con scena e personaggioPrint time: ≈ 27 h 6 minThe GenesysCharacters & Figures
FREE11 parts · 15 h 52 · Creality SPARKX i7 · 162 gPrint nowBatgirl, figura da assemblarePrint time: ≈ 15 h 52 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 12 · Creality SPARKX i7 · 46 gPrint nowGoku, figure to assemblePrint time: ≈ 6 h 12 minThe GenesysCharacters & Figures
FREE1 part · 10 h 44 · Creality SPARKX i7 · 71 gPrint nowDick Dastardly, statuinaPrint time: ≈ 10 h 44 minThe GenesysCharacters & Figures
FREE4 parts · 5 h 32 · Creality SPARKX i7 · 41 gPrint nowChaozu, figure to assemble with diorama basePrint time: ≈ 5 h 32 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 02 · Creality SPARKX i7 · 42 gPrint nowYamcha, figura da collezione con basi a tema desertoPrint time: ≈ 6 h 2 minThe GenesysCharacters & Figures