Piccolo, figure to assemble
- Ready to print on a Creality SPARKX i7.
- Estimated time: about 7 h 15 min on a Creality SPARKX i7.
- About 50 g of PLA.
- Prints in 4 sessions.
- 4 parts to assemble.
- Single colour: you choose which.
- Free catalogue model.
Free
QUANTITY
FEATURES
- PARTS
- 4
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 52.7 mmDepth 104.9 mmHeight 30.5 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 7 h 11 · 47.5 g · 4 sessions
Small, figure to assemble is a miniature model of the character from the Dragon Ball series, composed of several parts to be joined together. The set includes the character on an irregular base and two rectangular support plates with small vertical elements, plus a circular piece. It is intended for collectors and fans of the series, for display on a shelf or desk
- Miniature in several parts to assemble
- Character on a dedicated base
- Two rectangular support plates
- Collectible for Dragon Ball fans
- For display on shelf or desk
THE PARTS · 4
OP piccoloPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base opening with refsPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base opening without refsPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
CollePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
FEATURES
- PARTS
- 4
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 52.7 mmDepth 104.9 mmHeight 30.5 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 7 h 11 · 47.5 g · 4 sessions
ADOPTION
0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet
Reviews
No reviews yetReviews come from people who bought the model and printed it at least once.
More in «Characters & Figures»
FREE9 parts · 26 h 31 · Creality SPARKX i7 · 206 gPrint nowSuperlópez, figura da assemblarePrint time: ≈ 26 h 31 minThe GenesysCharacters & Figures
FREE12 parts · 25 h 33 · Creality SPARKX i7 · 184 gPrint nowBatatinha, diorama con personaggio e cabina telefonicaPrint time: ≈ 25 h 33 minThe GenesysCharacters & Figures
FREE17 parts · 27 h 06 · Creality SPARKX i7 · 199 gPrint nowBenny, diorama da assemblare con scena e personaggioPrint time: ≈ 27 h 6 minThe GenesysCharacters & Figures
FREE11 parts · 15 h 52 · Creality SPARKX i7 · 162 gPrint nowBatgirl, figura da assemblarePrint time: ≈ 15 h 52 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 12 · Creality SPARKX i7 · 46 gPrint nowGoku, figure to assemblePrint time: ≈ 6 h 12 minThe GenesysCharacters & Figures
FREE1 part · 10 h 44 · Creality SPARKX i7 · 71 gPrint nowDick Dastardly, statuinaPrint time: ≈ 10 h 44 minThe GenesysCharacters & Figures
FREE4 parts · 5 h 32 · Creality SPARKX i7 · 41 gPrint nowChaozu, figure to assemble with diorama basePrint time: ≈ 5 h 32 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 02 · Creality SPARKX i7 · 42 gPrint nowYamcha, figura da collezione con basi a tema desertoPrint time: ≈ 6 h 2 minThe GenesysCharacters & Figures