Re Osteras il Prescelto di Holmuran, miniatura da assemblare
- Ready to print on a Creality SPARKX i7.
- Estimated time: about 4 h 30 min on a Creality SPARKX i7.
- About 25 g of PLA.
- Prints in 7 sessions.
- 7 parts to assemble.
- Single colour: you choose which.
- Free catalogue model.
Free
QUANTITY
FEATURES
- PARTS
- 7
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 46.0 mmDepth 83.9 mmHeight 72.0 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 4 h 35 · 22.8 g · 7 sessions
Unofficial product for Dungeons & Dragons and other role-playing games. King Osteras the Chosen of Holmuran is a multi-part miniature depicting a warrior sovereign of the Death-Tide Jurakin army, with ornate armor, crown and cloak. The set includes the character's body, a circular base, two lower hands, a shield, a trident and a banner with an emblem, to assemble and paint for the gaming table. The complete miniature measures approximately 8.4 cm at the widest piece
- Multi-part miniature to assemble and paint
- Death-Tide Jurakin character with armor and crown
- Includes trident, shield and banner with emblem
- Circular base for the gaming table
THE PARTS · 7
King Osteras-The Chosen of HolmuranPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
JuraKing TridentPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
JuraKing ShieldPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Juraking BasePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Juraking Lower Hand LPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Juraking Lower Hand RPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Death-Tide Holmuran StendardPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
FEATURES
- PARTS
- 7
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 46.0 mmDepth 83.9 mmHeight 72.0 mm
- PRODUCTION NODE
- Creality SPARKX i7Print time 4 h 35 · 22.8 g · 7 sessions
ADOPTION
0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet
Reviews
No reviews yetReviews come from people who bought the model and printed it at least once.
More in «Dungeons & Dragons»
FREE5 parts · 256 h 01 · Anycubic Chiron · 1,286 gPrint nowDifensore nano, miniatura da assemblarePrint time: ≈ 256 h 1 minThe GenesysDungeons & Dragons
FREE2 parts · 11 h 05 · Creality SPARKX i7 · 54 gPrint nowSlathos su Hive Colossus, miniaturaPrint time: ≈ 11 h 5 minThe GenesysDungeons & Dragons
FREE17 parts · 55 h 09 · Creality SPARKX i7 · 315 gPrint nowBaalzrodan il Re Demone, figura scompostaPrint time: ≈ 55 h 9 minThe GenesysDungeons & Dragons
FREE1 part · 12 h 48 · Creality SPARKX i7 · 66 gPrint nowPiccola torre di avvistamento amazzonicaPrint time: ≈ 12 h 48 minThe GenesysDungeons & Dragons
FREE10 parts · 15 h 52 · Creality SPARKX i7 · 87 gPrint nowRosputakk su Demonfrog cornuto gigante, miniatura da assemblarePrint time: ≈ 15 h 52 minThe GenesysDungeons & Dragons
FREE4 parts · 133 h 32 · Elegoo Neptune 3 Plus · 634 gPrint nowJanto Beetroot, gnomo con spada corta da assemblarePrint time: ≈ 133 h 32 minThe GenesysDungeons & Dragons
FREE3 parts · 3 h 02 · Creality SPARKX i7 · 15 gPrint nowVulpeana Whitebranch, maga elfica con volpe famiglioPrint time: ≈ 3 h 2 minThe GenesysDungeons & Dragons
FREE2 parts · 4 h 33 · Creality SPARKX i7 · 18 gPrint nowPrincipessa Inca a cavallo di un raptor, miniatura FantasyPrint time: ≈ 4 h 33 minThe GenesysDungeons & Dragons