Superlópez, figura da assemblare

Superlópez, figura da assemblare

  • Ready to print on a Creality SPARKX i7.
  • Estimated time: about 1 d 3 h on a Creality SPARKX i7.
  • About 205 g of PLA.
  • Prints in 9 sessions.
  • 9 parts to assemble.
  • Single colour: you choose which.
  • Free catalogue model.
Free
QUANTITY

FEATURES

PARTS
9
COMPATIBLE PRINTERS
337authorised to print at least one part
FOOTPRINT
Width 188.5 mmDepth 102.9 mmHeight 187.1 mm
PRODUCTION NODE
Creality SPARKX i7Print time 26 h 31 · 205.9 g · 9 sessions

Superlópez figure to assemble, made up of several parts: large base, small base, body with cape, head, arms, trousers, pacifier and a small peg for fixing to the ground. Once the pieces are joined, a full-body figurine of the character is obtained, with cape and pacifier, resting on its own circular base. The model is intended for those who want to build and collect a figure of the famous comic character. The large base measures 18.85 cm in its largest dimension

  • Superlópez figure in several parts to assemble
  • Large circular base and small base included
  • Separate parts for head, arms, trousers and cape
  • Pacifier and peg for fixing to the ground
  • Large base of 18.85 cm in its largest dimension

THE PARTS · 9

Base grandePLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Bichete sueloPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Cabeza LopezPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Brazo izq LopezPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Brazo derecho LopezPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Capa LopezPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Calzones LopezPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Base pequeña LopezPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Chupete LopezPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C

FEATURES

PARTS
9
COMPATIBLE PRINTERS
337authorised to print at least one part
FOOTPRINT
Width 188.5 mmDepth 102.9 mmHeight 187.1 mm
PRODUCTION NODE
Creality SPARKX i7Print time 26 h 31 · 205.9 g · 9 sessions

ADOPTION

0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet

Reviews

No reviews yetReviews come from people who bought the model and printed it at least once.

Stay in touch

The Genesys news, in your inbox.

Leave your email and we’ll write when there’s something new.

the GENESYSThe Genesys S.r.l. socio unico · P.IVA 13675650967 · © 2026
Sell your modelsGuides and ideasCompatible printersPrivacyTerms of saleTerms of ServiceITEN

Cookies and measurement tools

We use cookies and browser storage that are strictly necessary to run the site. Only if you accept do we also use statistics tools (Google Analytics, Microsoft Clarity) and marketing tools (the Meta pixel). You can accept everything, reject everything or choose, and change your mind at any time from “Cookie settings” at the bottom of every page. Cookie policy