TMNT Michelangelo, guscio espositivo a pannello
- Ready to print on an Elegoo Neptune 3 Plus.
- Estimated time: about 16 h on an Elegoo Neptune 3 Plus.
- About 160 g of PLA.
- Prints in 6 sessions.
- 6 parts to assemble.
- Free catalogue model.
Free
QUANTITY
FEATURES
- PARTS
- 6
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 147.8 mmDepth 155.2 mmHeight 37.8 mm
- PRODUCTION NODE
- Elegoo Neptune 3 PlusPrint time 16 h 14 · 161.0 g · 6 sessions
The display shell dedicated to Michelangelo of the Teenage Mutant Ninja Turtles is a decorative panel designed to showcase the character's figure. The subject is made up of several parts: the green hexagonal shell, the orange band, the two-tone sewer hat, the black elements and a circular support. The parts combine into a single three-dimensional wall piece, suitable for collectors and fans of the series
- Display panel inspired by Michelangelo of the Teenage Mutant Ninja Turtles
- Green hexagonal shell with orange band
- Two-tone sewer hat and black finishing parts
- Made up of several parts to combine
- Designed for wall display
THE PARTS · 6
Green HexesPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Orange BandPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Brown PartsPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Black PartsPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Silver PARTSPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
Gray Sewer Cap 2colorPLA
RECOMMENDED MATERIALPLA
Layer0.20 mm
Infill15 %
Supportsyes
Bed adhesionyes
Nozzle220 °C
Bed55 °C
FEATURES
- PARTS
- 6
- COMPATIBLE PRINTERS
- 337authorised to print at least one part
- FOOTPRINT
- Width 147.8 mmDepth 155.2 mmHeight 37.8 mm
- PRODUCTION NODE
- Elegoo Neptune 3 PlusPrint time 16 h 14 · 161.0 g · 6 sessions
ADOPTION
0COPIES TAKEN
0PRINTS COMPLETED
New · no reviews yet
Reviews
No reviews yetReviews come from people who bought the model and printed it at least once.
More in «Characters & Figures»
FREE9 parts · 26 h 31 · Creality SPARKX i7 · 206 gPrint nowSuperlópez, figura da assemblarePrint time: ≈ 26 h 31 minThe GenesysCharacters & Figures
FREE12 parts · 25 h 33 · Creality SPARKX i7 · 184 gPrint nowBatatinha, diorama con personaggio e cabina telefonicaPrint time: ≈ 25 h 33 minThe GenesysCharacters & Figures
FREE17 parts · 27 h 06 · Creality SPARKX i7 · 199 gPrint nowBenny, diorama da assemblare con scena e personaggioPrint time: ≈ 27 h 6 minThe GenesysCharacters & Figures
FREE11 parts · 15 h 52 · Creality SPARKX i7 · 162 gPrint nowBatgirl, figura da assemblarePrint time: ≈ 15 h 52 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 12 · Creality SPARKX i7 · 46 gPrint nowGoku, figure to assemblePrint time: ≈ 6 h 12 minThe GenesysCharacters & Figures
FREE1 part · 10 h 44 · Creality SPARKX i7 · 71 gPrint nowDick Dastardly, statuinaPrint time: ≈ 10 h 44 minThe GenesysCharacters & Figures
FREE4 parts · 5 h 32 · Creality SPARKX i7 · 41 gPrint nowChaozu, figure to assemble with diorama basePrint time: ≈ 5 h 32 minThe GenesysCharacters & Figures
FREE4 parts · 6 h 02 · Creality SPARKX i7 · 42 gPrint nowYamcha, figura da collezione con basi a tema desertoPrint time: ≈ 6 h 2 minThe GenesysCharacters & Figures