PLA+14
Made from plants, petroleum-free, recyclable.€ 20.00 · 1 kg
THE GENESYS FILAMENTSThe right colour
The right colour
for every object.
Choose the material, then the colour. Put together all the spools you need and pay once.
IN 5 SECONDS
What do you want to print?
Tap an answer: we tell you which spool to get.WE RECOMMENDPLA EcogeniusThe easiest to print: if it is your first spool, play it safe.
€ 20.00
Start with the basics
Two materials to begin with, in plain words.PLAThe easiest of allIf it is your first spool, take this one. It does not smell, does not warp and prints almost everything well: toys, gifts, decorations, organisers.
Easy to print
Tough
Fine outdoors too
PETGThe toughest of the easy onesWhen the object has to work: in the kitchen, in the bathroom, on the balcony. A little flexible, it does not break if it falls.
Easy to print
Tough
Fine outdoors too
For experts:
All filaments
57 filaments- PLA
PLAsingle colourA PLA designed to be visible under X-rays.€ 30.00 · 0.75 kg
PLAsingle colourA PLA made to be sanded after printing.€ 25.50 · 0.75 kg- PLA+11Fast and precise, no warping even on a cold plate.€ 25.00 · 1 kg
- PLA+5Odourless, with minimal warping.€ 24.75 · 0.75 kg
- PLA+9A flexible, biodegradable PLA.€ 20.00 · 0.5 kg
- PLAsingle colourHolds its shape up to 90 °C and takes impacts better.€ 36.00 · 1 kg
- PLAA matte PLA, in black and white.€ 25.00 · 1 kg
- PLA+11For fast printing: up to 1000 mm/s.€ 25.00 · 1 kg
PETsingle colourCarbon fibre PET, for mechanical parts.€ 55.00 · 0.75 kg
PETG+9As strong as ABS, as stable as PLA.€ 24.00 · 1 kg- PETGThe PETG of the high-speed line.€ 25.00 · 1 kg
- TPEFlexible, resistant to abrasion and scratching.€ 43.00 · 0.5 kg
- TPEFlexible, resistant to abrasion and scratching.€ 43.00 · 0.5 kg
- TPEFlexible, resistant to mechanical stress and oils.€ 40.00 · 0.5 kg
- TPEFlexible, resistant to stress and oils.€ 40.00 · 0.5 kg
- TPUTechnical rubber: chemical-resistant, springs back.€ 80.00 · 0.5 kg
- TPUTechnical rubber: chemical- and wear-resistant.€ 80.00 · 0.5 kg
- TPUThe most rigid of the flexibles: 90 Shore A.€ 40.00 · 0.5 kg
PC-ABSsingle colourUL94 V0 certified for fire safety.€ 42.00 · 1 kg- ABSThe ABS of the high-speed line.€ 26.00 · 1 kg
PC-PBTsingle colourA polycarbonate and PBT alloy for technical parts.€ 40.00 · 1 kg- ABSA light ABS, heat-resistant and durable.€ 20.00 · 1 kg
- ABSAn ABS that flows well and takes more heat.€ 30.00 · 1 kg
- ABS+9A tough, glossy ABS for shells and gears.€ 20.00 · 1 kg
- HIPSSupport for ABS: dissolves in limonene.€ 27.00 · 1 kg
ABSsingle colourAn ABS for medical use, a certified device.€ 41.00 · 1 kg- ABSsingle colourCertified for contact with food.€ 41.00 · 1 kg
- PCsingle colourPolycarbonate for technical parts that run hot.€ 41.00 · 0.5 kg
- ASAMade to stay outdoors: it takes the sun.€ 38.00 · 1 kg
- PC-ABSAn odourless PC-ABS with low warping.€ 41.00 · 0.5 kg
- PC-PBTsingle colourGlass fibre reinforced: it holds its dimensions.€ 42.00 · 0.75 kg
- ABSsingle colourABS with carbon fibre.€ 47.00 · 0.75 kg
- PAsingle colourCarbon-filled nylon, in place of metal parts.€ 60.00 · 0.75 kg
- PAsingle colourPA66 nylon for parts that run hot.€ 63.00 · 0.75 kg
PPsingle colourPolypropylene with 30% glass fibre.€ 72.00 · 0.75 kg
PANylon with real carbon fibre, not powder.€ 80.00 · 0.75 kg- PEsingle colourHigh-density polyethylene: rigid and tough.€ 40.00 · 0.75 kg
- PPPure polypropylene, close to injection moulding.€ 40.00 · 0.75 kg
- PMMAsingle colourAn easy-to-print PMMA, for models and prototypes.€ 36.00 · 0.5 kg
- PPSsingle colourPPS with 25% glass fibre.€ 75.00 · 0.75 kg
- PPSsingle colourPPS with carbon: unfazed by chemical attack.€ 75.00 · 0.75 kg
- PEEKsingle colourPEEK with 15% real carbon fibre.€ 300.00 · 0.75 kg
PPsingle colourPolypropylene with 18% carbon fibre.€ 52.00 · 0.7 kg- single colourFlexible, resistant to skin oils.€ 58.00 · 0.5 kg
single colourRigid, with high tensile strength.€ 66.00 · 0.5 kg- single colourRigid, with high tensile strength.€ 82.00 · 0.75 kg
- single colourFrom recycled tyres: one tyre, nine spools.€ 43.00 · 0.5 kg
- single colourPolymer with marble powders, for architecture.€ 40.00 · 0.5 kg
- single colourLight and strong, with carbon fibres.€ 110.00 · 0.75 kg
- single colourElastic, with shape memory and abrasion resistance.€ 63.00 · 0.75 kg
single colourPolymer with clay powders, for architecture.€ 40.00 · 0.5 kg
single colourFor printing brick elements.€ 38.00 · 0.75 kg
single colourStone powders: it feels like stone.€ 38.00 · 0.75 kg- single colourPolymer with clay powders, for architecture.€ 38.00 · 0.75 kg
single colourPolymer with stone powders, for architecture.€ 38.00 · 0.75 kg- single colourPolymer with stone powders, for architecture.€ 38.00 · 0.75 kg
LEARN MORE
Want to know more?
- 01Choose the filamentStart from the material: PLA is the easiest.
- 02Choose the colourEvery filament costs the same in every colour.
- 03Weight and quantityAdd more colours and more spools, then go to checkout.