Works with Hermes

Voron 2.4 350 with Hermes: print from the catalogue, no slicer

One tap and it prints. Hermes connects to your 2.4 350 on your home network and brings you a catalogue already prepared for your printer: no slicer.

Connect your 2.4 350 with Hermes· € 49.99 See what to print

Your 2.4 350 with Genesys

BUILD VOLUME: 350 × 350 × 325 mm
HOW HERMES CONNECTS: Over your networkHermes and the printer on the same home network
NOZZLE: 0.4 mm
MATERIAL: PLA

We scale objects larger than your build plate to fit before preparing the file.

What changes with Hermes

No slicer
The file is already prepared for your 2.4 350: choose and tap Print.
The catalogue is ready
Every object is fitted to your 2.4 350 before it arrives.
Alert when it's done
We let you know on your phone when the object is ready.

How to connect, in 3 steps

01
Plug Hermes in near your router
02
In the app, Hermes finds your 2.4 350 on your network
03
Choose an object and tap Print

Where to start

The whole catalogue →

Frequently asked questions

How large can objects be for my 2.4 350?

The build volume is 350 × 350 × 325 mm. We scale larger objects to fit these dimensions before preparing the file.

Do I need a slicer to print with my 2.4 350?

No. We prepare the file for your 2.4 350: you choose the object and tap Print.

How do I print from my phone with my 2.4 350?

Connect Hermes and your printer to the same home network. Choose an object in the app and tap Print. We prepare the file; you can follow the print on your phone.

Which nozzle do I need on my 2.4 350?

The standard 0.4 mm one: the catalogue files are prepared for this nozzle.

Which material should I use?

PLA: it's the material we prepare the 2.4 350's files for.

More Voron printers

All printers →

Your 2.4 350 is ready for Hermes.

Choose from the catalogue and print with Hermes: we prepare the file for your printer.

Connect your 2.4 350 with Hermes· € 49.99