Works with Hermes

Voron Trident 300 with Hermes: print from the catalogue, no slicer

One tap and it prints. Hermes connects to your Trident 300 on your home network and brings you a catalogue already prepared for your printer: no slicer.

Connect your Trident 300 with Hermes· € 49.99 See what to print

Your Trident 300 with Genesys

BUILD VOLUME: 300 × 300 × 250 mm
HOW HERMES CONNECTS: Over your networkHermes and the printer on the same home network
NOZZLE: 0.4 mm
MATERIAL: PLA

We scale objects larger than your build plate to fit before preparing the file.

What changes with Hermes

No slicer
The file is already prepared for your Trident 300: choose and tap Print.
The catalogue is ready
Every object is fitted to your Trident 300 before it arrives.
Alert when it's done
We let you know on your phone when the object is ready.

How to connect, in 3 steps

01
Plug Hermes in near your router
02
In the app, Hermes finds your Trident 300 on your network
03
Choose an object and tap Print

Where to start

The whole catalogue →

Frequently asked questions

How large can objects be for my Trident 300?

The build volume is 300 × 300 × 250 mm. We scale larger objects to fit these dimensions before preparing the file.

Do I need a slicer to print with my Trident 300?

No. We prepare the file for your Trident 300: you choose the object and tap Print.

How do I print from my phone with my Trident 300?

Connect Hermes and your printer to the same home network. Choose an object in the app and tap Print. We prepare the file; you can follow the print on your phone.

Which nozzle do I need on my Trident 300?

The standard 0.4 mm one: the catalogue files are prepared for this nozzle.

Which material should I use?

PLA: it's the material we prepare the Trident 300's files for.

More Voron printers

All printers →

Your Trident 300 is ready for Hermes.

Choose from the catalogue and print with Hermes: we prepare the file for your printer.

Connect your Trident 300 with Hermes· € 49.99